Casa Claude Bundle need to Exclude on GMC Cantoneira Metálica 90° em Aço 60 / 80 / 100 mm | Esquadro Metálico GeZu AngleFit | Conjunto de 4 a 12
GeZu AngleFit corner bracket - 60 x 60 x 40 mm - Galvanised Silver - Set of 4 - Gezu Impex
AF-060-GAL-MAIN GeZu AngleFit corner bracket 60 x 60 x 40 mm galvanised silver
GeZu AngleFit corner bracket 60 x 60 x 40 mm galvanised silver dimensions

Expedição em 24 horas

Muito procurado 10+ produtos vendidos nas últimas 24 horas

GeZu AngleFit corner bracket - 60 x 60 x 40 mm - Galvanised Silver - Set of 4 - Gezu Impex
AF-060-GAL-MAIN GeZu AngleFit corner bracket 60 x 60 x 40 mm galvanised silver
GeZu AngleFit corner bracket 60 x 60 x 40 mm galvanised silver dimensions
Informações do produto

The GeZu AngleFit 90° corner bracket set gives you 4, 6, 8 or 12 identical brackets in one order, so every corner of a frame is fixed with the same size and the same finish. Each bracket is pressed from 3 mm steel with eight pre-punched 6 mm fixing holes, and carries load across the joint rather than leaving the screws to do all the work.

  • Sets of 4, 6, 8 or 12. Every bracket in a set is the same size and finish, so one order covers a whole frame.
  • 3 mm steel in every size. The material thickness does not drop on the smaller brackets.
  • Eight 6 mm holes, four per leg in a 2 x 2 pattern, so load spreads across the joint instead of concentrating on one fixing.
  • Two finishes. Galvanised silver for structural work, matt black powder coat where the bracket stays visible.
  • Three sizes. 60, 80 and 100 mm legs, with bracket widths of 40, 50 and 60 mm.
  • Standard fasteners. The 6 mm holes take wood screws, machine bolts or coach screws, so you fix it with what you already have.

Specifications (per bracket)

60 × 60 × 40 mm 80 × 80 × 50 mm 100 × 100 × 60 mm
Leg length 60 mm 80 mm 100 mm
Bracket width 40 mm 50 mm 60 mm
Material thickness 3 mm 3 mm 3 mm
Fixing holes 8 × 6 mm 8 × 6 mm 8 × 6 mm
Hole pitch across width 20 mm 30 mm 40 mm
Hole pitch along leg 30 mm 50 mm 70 mm
Material Steel Steel Steel
Pack quantity 4, 6, 8 or 12 4, 6, 8 or 12 4, 6, 8 or 12

What is in the box

4, 6, 8 or 12 corner brackets, depending on the set you choose, all in the same size and finish. Timber, screws, bolts, nuts and washers are not included. Each bracket has eight holes, so plan for up to 32 fixings per set of 4, 48 per set of 6, 64 per set of 8 and 96 per set of 12.

Where it is used

Pergola and carport corners, shed and workshop framing, raised beds and planters, shelf and worktop supports, fence rail to post joints, and furniture carcassing.

Fitting

Hold the bracket against the joint, mark through the holes, drill pilot holes to suit your fastener, then drive the fixings. Use all eight holes wherever the joint carries load. A cordless driver is enough; no specialist tools are needed.

The L shaped design holds a corner square and resists twisting in the joint. Eight pre-punched 6 mm holes sit four per leg in a 2 x 2 pattern, so the load spreads across the joint instead of concentrating on one fixing. Material thickness stays at 3 mm on every size, including the smallest.

Use these brackets on pergola and carport corners, shed and workshop framing, raised beds and planters, shelf and worktop supports, fence rail to post joints, and furniture carcassing. Three leg lengths cover everything from a shelf cleat to a pergola corner.

Hold the bracket against the joint and mark through the holes. Drill pilot holes to suit your fastener, then drive the fixings. Use all eight holes wherever the joint carries load. The 6 mm holes take wood screws, machine bolts or coach screws, so a cordless driver is all you need.

Detalhes técnicos

MM CM pol.
Pack Quantity
4 brackets
Leg Length
60 mm 6 cm 2.36 in
Bracket Width
40 mm 4 cm 1.57 in
Material Thickness
3 mm 0.3 cm 0.12 in
Fixing Holes
8 x 6 mm per bracket 4 per leg
Fixing Holes per Set
32
Hole Diameter
6 mm 0.6 cm 0.24 in
Hole Pitch Across Width
20 mm 2 cm 0.79 in
Hole Pitch Along Leg
30 mm 3 cm 1.18 in
Set Weight
10000 g 10.00 kg 22.05 lb
Material
Steel
Finish
Galvanised silver

Cantoneira Metálica 90° em Aço 60 / 80 / 100 mm | Esquadro Metálico GeZu AngleFit | Conjunto de 4 a 12

SKU: DUMMY-GZ-AF-060-GAL-4
£16.61Inc VAT Preço promocional
  • Instalação fácil
  • Qualidade certificada
  • Envio rápido
Tamanho do conjunto: Conjunto de 4
Tamanho do conjunto :
Tamanho: 60 × 60 × 40 mm
Tamanho :
Acabamento: Galvanizado prateado
Acabamento :
Add à lista Add compar.
American Express
Apple Pay
Google Pay
Maestro
Mastercard
iDEAL Wero
Klarna
BLIK
PayPal
Shop Pay
Union Pay
Visa
+6 more

Avise-me quando voltar a estar em stock

Introduza o seu endereço de e-mail para ser notificado quando o produto voltar a estar disponível.

Poupe ainda mais

Desconto aplicado automaticamente ao finalizar a compra.
Comprar 4+
£15.78
IVA incluído
Poupe 5%
Comprar 8+
£14.95
IVA incluído
Poupe 10%
Comprar 12+
£14.12
IVA incluído
Poupe 15%
Comprar 16+
£13.29
IVA incluído
Poupe 20%

Detalhes técnicos

MM CM pol.
Pack Quantity
4 brackets
Leg Length
60 mm 6 cm 2.36 in
Bracket Width
40 mm 4 cm 1.57 in
Material Thickness
3 mm 0.3 cm 0.12 in
Fixing Holes
8 x 6 mm per bracket 4 per leg
Fixing Holes per Set
32
Hole Diameter
6 mm 0.6 cm 0.24 in
Hole Pitch Across Width
20 mm 2 cm 0.79 in
Hole Pitch Along Leg
30 mm 3 cm 1.18 in
Set Weight
10000 g 10.00 kg 22.05 lb
Material
Steel
Finish
Galvanised silver

The GeZu AngleFit 90° corner bracket set gives you 4, 6, 8 or 12 identical brackets in one order, so every corner of a frame is fixed with the same size and the same finish. Each bracket is pressed from 3 mm steel with eight pre-punched 6 mm fixing holes, and carries load across the joint rather than leaving the screws to do all the work.

  • Sets of 4, 6, 8 or 12. Every bracket in a set is the same size and finish, so one order covers a whole frame.
  • 3 mm steel in every size. The material thickness does not drop on the smaller brackets.
  • Eight 6 mm holes, four per leg in a 2 x 2 pattern, so load spreads across the joint instead of concentrating on one fixing.
  • Two finishes. Galvanised silver for structural work, matt black powder coat where the bracket stays visible.
  • Three sizes. 60, 80 and 100 mm legs, with bracket widths of 40, 50 and 60 mm.
  • Standard fasteners. The 6 mm holes take wood screws, machine bolts or coach screws, so you fix it with what you already have.

Specifications (per bracket)

60 × 60 × 40 mm 80 × 80 × 50 mm 100 × 100 × 60 mm
Leg length 60 mm 80 mm 100 mm
Bracket width 40 mm 50 mm 60 mm
Material thickness 3 mm 3 mm 3 mm
Fixing holes 8 × 6 mm 8 × 6 mm 8 × 6 mm
Hole pitch across width 20 mm 30 mm 40 mm
Hole pitch along leg 30 mm 50 mm 70 mm
Material Steel Steel Steel
Pack quantity 4, 6, 8 or 12 4, 6, 8 or 12 4, 6, 8 or 12

What is in the box

4, 6, 8 or 12 corner brackets, depending on the set you choose, all in the same size and finish. Timber, screws, bolts, nuts and washers are not included. Each bracket has eight holes, so plan for up to 32 fixings per set of 4, 48 per set of 6, 64 per set of 8 and 96 per set of 12.

Where it is used

Pergola and carport corners, shed and workshop framing, raised beds and planters, shelf and worktop supports, fence rail to post joints, and furniture carcassing.

Fitting

Hold the bracket against the joint, mark through the holes, drill pilot holes to suit your fastener, then drive the fixings. Use all eight holes wherever the joint carries load. A cordless driver is enough; no specialist tools are needed.

The L shaped design holds a corner square and resists twisting in the joint. Eight pre-punched 6 mm holes sit four per leg in a 2 x 2 pattern, so the load spreads across the joint instead of concentrating on one fixing. Material thickness stays at 3 mm on every size, including the smallest.

Use these brackets on pergola and carport corners, shed and workshop framing, raised beds and planters, shelf and worktop supports, fence rail to post joints, and furniture carcassing. Three leg lengths cover everything from a shelf cleat to a pergola corner.

Hold the bracket against the joint and mark through the holes. Drill pilot holes to suit your fastener, then drive the fixings. Use all eight holes wherever the joint carries load. The 6 mm holes take wood screws, machine bolts or coach screws, so a cordless driver is all you need.

Perguntas frequentes!

Consulte as perguntas mais frequentes para obter a melhor experiência possível.

Tem alguma questão?

Tem alguma questão?

Pode contactar-nos através de support@gezu-impex.nl

Sim. Oferecemos envios rápidos e fiáveis para a maioria dos países europeus. As opções de envio e os prazos de entrega são apresentados no checkout.

Para garantir que escolhe o produto certo, consulte as descrições detalhadas e as especificações em cada página de produto. Se precisar de ajuda, não hesite em contactar a nossa equipa de apoio ao cliente para obter aconselhamento personalizado. Estamos aqui para o ajudar a fazer a melhor escolha para o seu projeto!

Pode contactar-nos por e-mail através de support@gezu-impex.nl ou através do nosso formulário de contacto. Estamos disponíveis de segunda a sexta-feira.

Oferecemos uma política de devolução de 30 dias para produtos não utilizados e na embalagem original. Contacte a nossa equipa de apoio ao cliente para iniciar uma devolução.

Aceitamos os principais cartões de crédito (Visa, MasterCard, American Express), PayPal, Apple Pay, Google Pay e transferências bancárias para encomendas de maior valor.

Tem alguma questão?

Tem alguma questão?

Pode contactar-nos através de support@gezu-impex.nl

Icon